DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit
Free Shipping Included! DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit by DEWALT at Leroy Troy Tools. MPN: DC618K. Hurry! Limited time offer. Offer valid only while supplies last. Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge
Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger.
The 20-degree angled DC618K nailer
DC618K 18-Volt, 16 Gauge, 20-Degree Angled Finish Nailer Kit At a Glance:
- Consistent nail penetration into both soft and hard joints
- Sequential and bump operating modes
- Integrated LED lights
- Includes one battery and 1-hour charger
- Three-year limited warranty; two-year free service
Power and Performance
The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use.
Comfort and Convenience
You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A 6 position dial enables you to move between applications without having to re-acquire exact depth setting. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. This nailer also includes integrated LED lights for perfect placement in low-lit or shadowy areas.
DEWALT's XRP Extended-Life Battery System
A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.
The DC618K comes with one 18-volt XRP battery and a 1-hour charger.
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.
What's in the Box
DEWALT DC618K 20-degree angled nailer; 18-volt XRP battery; 1-hour charger; reversible belt hook; no-mar tip; safety glasses; operating instructions
The DC618K engine works as fast as you do--driving up to five nails per second (view larger).
Features & Highlights
- Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
- Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
- Contact Trip Lock-Off allows trigger to be disabled when not in use. 20-degree angled magazine (up to 120 nail capacity) and will accept DEWALT and most other 20-degree angled finish nails
- Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting
|Item Weight:||8.5 pounds|
|Item Size:||4.18 x 12.8 x 12.8 inches|
|Package Weight:||15.7 pounds|
|Package Size:||14.72 x 6.93 x 6.93 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by DEWALT, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: LPF21PL, ean: 6818237136201,
Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger. 2 nailers in one: includes two quick-change nosepieces, converts to fra...
mpn: N66C-1, ean: 0787721825975,
Drives wire weld and plastic inserted coil nails. Adjustable depth guide sets nails to desired depths quickly and conveniently. Lightweight aluminum design for added durability. Soft rubber foot prevents damage to softer woods. Tool-free adjustable e...
mpn: BTFP12569, ean: 0077914060949,
The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2" to 2" length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically des...
mpn: EHF1838K, ean: 0754262207508,
Adjustable knobs allow for tool-free adjustment 5/16 - 7/16 inches for solid hardwood and 1/2 - 5/8 inches for engineered hardwood and engineered bamboo.. Over-molded rubber grip for comfort and maneuverability. Muffled rear exhaust to direct air awa...
mpn: DW66C1R, ean: 0885911456920,
Dewalt 15 Degree 2-1/2 inches Coil Siding NailerDrives wire and plastic coil nails for added versatility and application. Tool-free depth of drive adjustment allows precise countersinking of staples quickly and easily. Adjustable air exhaust port kee...
mpn: SFL618, ean: 0784497304758,
The 3-in-1 flooring nailer from NuMax is great for the professional and homeowner alike. This nailer is easy to operate and conveniently shoots all three types of flooring fasteners; flooring staples, T-Cleats, and L-Cleats ranging in size from 1-1/2...
mpn: PCN65, ean: 0804879163244,
PCN65 Features: -15 Siding / fencing nailer.-Material: Magnesium.-360 adjustable exhaust.-Finger depth adjustment.-Air filter / anti-dust cap.-One piece driver blade.-Open nose design.-Reversible belt hook.-Trigger with safety lock.-Nail angle: 15.-P...
mpn: P320, ean: 0732454249192,
The Ryobi P320 brad nailer has comparable power to some gas-powered nailers and the convenience of a cordless power tool. Any nailing job you may need to perform around the house, from installing roofing tiles to reinforcing joints, can be accomplish...
mpn: XNB01Z, ean: 0088381669917,
The Makita 18V LXT Lithium-Ion Cordless 2" Brad Nailer, 18 Ga. (model XNB01Z, tool only), is an ideal solution for installing narrow trim and molding. The XNB01Z is compact and powerful, and drives a range of 18 gauge brad nails from 5/8" to 2" with ...
mpn: LPF21PL, ean: 0077914054115,
The Bostitch LPF21PL Low Profile Framing Nailer provides the user with power and efficiency. The low profile design allows the nailer to be used in small areas. The versatile trigger drive selector enables the user to select from single or multi-driv...