Dake 75H Model Hand Operated H-Frames Hydraulic Press, 75 Ton Capacity, 55" Length x 36" Width x 87" Height
Free Shipping Included! Dake 75H Model Hand Operated H-Frames Hydraulic Press, 75 Ton Capacity, 55'' Length x 36'' Width x 87'' Height by Dake at Leroy Troy Tools. MPN: 907003. Hurry! Limited time offer. Offer valid only while supplies last. The Dake 75H hand-operated H-frame hydraulic press applies up to 75 tons of force to facilitate pressing and forming. The channel iron H-frame
The Dake 75H hand-operated H-frame hydraulic press applies up to 75 tons of force to facilitate pressing and forming. The channel iron H-frame accepts large and bulky items, and the hoist adjusts the table height for proper positioning and automatically locks in place. The workhead is mounted on bearings to enable adjustment for off-center pressing. The handwheel advances the ram for quick placement near the object being pressed. The handpump lowers the ram onto the object with more precision and control than the handwheel. The release valve turns to release the hydraulic pressure, initiating rapid ram return after downstroke. Closing the valve at any point during the ram return will halt the ram.
The press has a gauge with a 4"-dia. display for pressure readings. It also includes two table plates for support and two V-blocks that hold the item in place during pressing. Interchangeable V-shaped and flat shaped ram noses are also included. Four 17/32"-dia. holes are located on the base to enable bench mounting. Mounting hardware is not included. Hydraulic oil is not included. Press is assembled.
|Load capacity||75 tons|
|Ram travel||4-1/2 inches|
|Screw travel||7 inches|
|Horizontal workhead travel||29-5/8 inches|
|Max. working height||36 inches|
|Min. working height||6 inches|
|Table dimensions||44 x 8-1/4 inches (W x L)|
|Press overall dimensions||87 x 55 x 36 inches (H x W x L)|
H is height, the vertical distance from the lowest to highest point of the press; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.
Hydraulic presses use fluid pressure to transmit a compressive force, which stays constant throughout the length of the ram's stroke. Metal forming is one common use of a hydraulic press.
Dake Machine Tools manufactures arbor presses, hydraulic presses, drill presses, power hammers, band and cold saws, belt grinders, tube benders, and auto feed systems. The company, founded in 1887, is headquartered in Grand Haven, MI.
What's in the Box?
- Dake 75H press
- Flat ram nose
- V-shaped ram nose
- (2) Table plates
- (2) V-blocks
Features & Highlights
- Handpump powers the hydraulic system, lowering the ram with up to 75 tons of force for heavy duty applications
- Adjustable-height table within the H-frame enables proper positioning of large and bulky items, and the movable workhead facilitates off-center pressing
- Handwheel quickly advances the ram for initial positioning, and the handpump lowers the ram with precision
- Release valve initiates and controls rapid ram return after downstroke
- Included table plates provide support and V-blocks hold items in place during pressing
|Item Weight:||12.45 pounds|
|Package Weight:||1184 pounds|
|Package Size:||54 x 26 x 26 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Dake, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
The Dake Force 10DA model electrically operated hydraulic Dura Press is powered by a single-phase, 110-volt motor to apply up to 10 tons of force to facilitate pressing and forming. The channel iron H-frame accepts large and bulky items, and the tabl...
The Dake SB-32 floor drill press is variable speed and has a larger drill capacity, more power, and a larger work diameter than the Dake SB-25 floor drill press. It has a 1-1/4" drill capacity, a 2 hp motor, and an 18" work diameter. A quick-release ...
'Bench Drill Press, Drive Type Belt, Swing 14-1/8 In., Voltage 120, Motor HP 1/2, Chuck Size 1/2 In., Number of Speeds 9, Capacity Steel 5/8 In., Capacity Cast Iron 5/8 In., Spindle Taper 2MT, Spindle Travel 3-1/8 In., Spindle to Table 16-1/2 In., Ba...
mpn: 37978, ean: 0095691379788,
The Ridgid 37978 is a 1-1/2-inch MegaPress ring for Standard Ridgid Press Tools. This prep tool works with a standard drill and remove burrs and smooth OD of pipe for fitting installation. They are designed in conjunction with the MegaPress System fi...
By Voyager Tools
mpn: VOY-153501, ean: 0609053677681,
120V 60Hz 300W Motor CSA/CUS Approved Non-Load Speed: 620 to 3,100rpmExceeds Industry Standards. Precision Manufacturing. Improved Design Standards. Professionally Tested. Quality Assured Guaranty. ...
By Voyager Tools
mpn: VOY-153500, ean: 0609053679005,
120V 60Hz 550W Motor CSA/CUS Approved Non-Load Speed: 250 to 3,100rpmExceeds Industry Standards. Precision Manufacturing. Improved Design Standards. Professionally Tested. Quality Assured Guaranty. ...
By US Gift
mpn: Cell-48-1036:200000:T, ean: 0808939787593,
48-1036 / Preform Drill PressProduct Details: Series - 48-1036Series Description - Preform Drill PressStatus - In StockProduct CategoryReturn Period from Invoice DateFinished Jewelry7 daysTools, Supplies and Packaging10 daysAll Other Products20 daysS...
Includes 30 Ton Press Protection Shield - 5750PSShields are counter balanced so they can easily be raised or lowered to any fixed position by hand. Extruded aluminum frame for durability with shatter-resistant polycarbonate protector shield providing...
Baileigh 110/220V Single Phase (Prewired 110) 15" Variable Speed Floor Drill Press.Includes built in work light. Depth stop on quill. 12 spindle speeds. 14"x18" work table. Drill chuck included. ...
mpn: 5750PS, ean: 0613364133750,
Protect yourself from injury with Sunex HD's 5750PS 40-50-ton press protection shield. Composed of an extruded aluminum frame, it contains a shatter-resistant polycarbonate protector to protect bystanders from flying debris. The shields are counter-b...